Fitting the restraint in the car – Simpson R3 User Manual
Page 4
4
The R3 is placed on back of the occupant between the seat and the driver’s back and shoulders.
Because of this, it is recommended to contour the back of the seat with the U-Shaped Molded Pad
provided. This will help the restraint become a part of the seat from a comfort standpoint.
The U-Shaped Molded Pad is inserted 2” down tom the
top of the shoulders
The seat pad can be taped/glued in place or Velcro’d
depending on type of seat. If seat has a cover, the pad
can be installed under the cover.
If you purchased the In-Seat version of the R3, you will
NOT have a chest strap on the device. There will be 2
straps with a metal O Ring at the bottom. Those attach
into your seat belts.
If using a cloth or leather cover, it may be necessary to
sew Velcro to it.
Fitting the Restraint in the car
Velcro these point to the
seat back for correct posi-
tioning. To determine
correct position, sit in the
seat with the device be-
hind you and adjust to fit.
In Seat Version