beautypg.com

For communications rom version 3.00 or greater – Sensaphone SCADA 3000 Upgrade instructions User Manual

Page 2

background image

For Communications ROM Version 3.00 or Greater:

If the unit has Communications ROM Version 3.00 or greater, then flash in

Comm-450.hex. To do this, select

Diagnostics> Flash Upgrade from the menu. Click the Select button and choose the file

Comm-450.hex,

click OK. Next, under the heading Select a Processor, choose Communications ROM (this may be selected
automatically). Next, click the Upload button. A warning message will appear letting you know that your
programming will be erased. Click OK to proceed. The Flash file transfer will start. This will take a few
minutes. After the file is completely loaded into the unit, the flash memory chip will be reprogrammed. The
LCD display will indicate when the reprogramming is complete by reinitializing the unit. When the file is
finished being transferred, you can click the Logout button.

4) After you have successfully loaded

Comm-450.hex, log in and flash the Control ROM with version Cntrl-

402.Hex. To do this, select Diagnostics> Flash Upgrade from the menu. Click the Select button and choose
the file

Cntrl-402.hex, click OK. Next, under the heading Select a Processor, choose Control ROM (this

may be selected automatically). Next, click the Upload button. A warning message will appear letting you
know that your programming will be erased. Click OK to proceed. The Flash file transfer will start. This will
take a few minutes. After the file is completely loaded into the unit, the flash memory chip will be repro-
grammed.

The LCD display will indicate when the reprogramming is complete by returning to the normal scrolling
mode. When the file is finished being transferred, you can click the Logout button.

5) The Flash memory reprogramming is finished. Your SCADA 3000 is presently set to factory default

settings. Now you must log in and reprogram the unit with your S3K programming file, C/Ladder programs,
voice messages, etc.

If you need assistance please call our Technical Support Department at 610-558-2700.

© 2005 Phonetics, Inc.

LIT-3002:

Flash

Reprogramming

5.2010