Blaupunkt Sacramento CD33 - Manual (Page 9)

ENGLISH
E-8
Storing the station names/Aux title
You can assign a name to each radio station and auxiliary
equipment and store it in memory. As much as 30 station
names can be stored composed with 8 characters each.
You can also assign a name to external equipment.
Storing the station names
1. Tune in a station whose name you want to store.
2. Press the DISP for more than 2 seconds.
The “EDIT” will light then the “_ _ _ _ _ _ _ _” on the
display window. The first “ _ ” flashes.
Storing the Aux title
1. Press the CD to select the AUX mode.
2. Press the DISP for more than 2 seconds.
The “EDIT” will light then the “_ _ _ _ _ _ _ _” on the
display window. The first “ _ ” flashes.
3. Enter the characters.
A. Rotate the VOL dial in a clockwise direction to select
the desired characters.
( A
➜ B ➜ C ➜ . . . Z ➜ < ➜ > ➜ ∗ ➜ + ➜ ′ ➜ − ➜ ′ ➜ /
➜0➜1➜2➜3...9➜“ ”Space )
B. Rotate the TUN/TRK dial to move the flashing cur-
sor.
C. Repeat steps A. and B. to complete entering the en-
tire name 8 characters max.
Erasing the station names
1. Tune in any station and press the DISP for more than 2
seconds.
2. Press the SC/PS .
The station name or “ _ _ _ _ _ _ _ _ ” flashing.
3. Rotate the VOL dial to select the name of the station that
you want to erase. To erase all the names of the stations,
display “ ALL DEL ”.
4. Press the SC/PS , then press the DISP for more than 2
seconds.
Repeat steps 3. and 4. if you want to erase other names.
5. To return to the normal radio reception, Press DISP .
Erasing the Aux title
1. Press the CD to select the AUX mode.
2. Press the DISP for more than 2 seconds. The first char-
acter of AUX title will flashes.
3. Press the DISP for more than 2 seconds again to erase
the AUX title.
4. To return to the normal display, Press DISP .
Tips
• To erase/correct a name or title, press the DISP for more
than 2 seconds to clear the character and re-enter.
• If you try to store more than 30 station names, “**FULL**”
will be displayed.
• When entering a name, pressing the following buttons af-
fects the display of characters as follows.
1 : Changes to inputting letters. (Starts with “A”.)
2 : Changes to inputting numbers. (Starts with “ 0 ”.)
3 : Changes to inputting characters. (Starts with “ < ”.)
6 : Enters a space (blank).
4. Press the SC/PS to store the station name.
The station name flashes.
5. To return to the normal radio reception, Press DISP .
Direct Access to Memorized Stations via ST-
CALL
You can search for the memorized AM & FM station names in
the memory.
1. Press the DISP to display the “ST-CALL” on the display
window.
2. Rotate the VOL dial to select the desired station name.
3. Press the SC/PS to tune in the desired station.
SacramentoCD33_Eng 2/5/03, 4:28 PM 8