Barco R9842040 - Manual (Page 8)

1. TLD HB (0.8:1) Lens Kit
Image 1-2
Move the handle of the lens anchor system to the left
Image 1-3
Take the lens out of the lens block
1.3 Installing the new lens
What has to be done?
This new lens has to be installed on the SLM series projector.
Necessary Tools
No tools necessary.
W ARNING : Risk of personal injury. Instructions for lens installation must be followed thoroughly.
How to install the new lens?
1. Take the lens assembly out of is packing material and remove the lens caps on both sides.
2. Move the handle (A) of the lens anchor system to the right. (image 1-4)
4 R5976662 TLD HB (0.8:1) LENS KIT 22/12/2004