Robustel R3000 Quick Guide - Manual (Page 8)

Robustel GoRugged R3000 Quick Guide
RT_QG_R3000_v.1.0.0
25.01.2014 8/8
Password, Dialup No. (you can check these information from local ISP ) --> click “Apply” -> click “Save” and
“Reboot”.
Note: After configure R3000 with new settings, you need to click “Apply” -> “Save” -> “Reboot”.
3. After above correct configuration, R3000 should succeed to establish PPP connection. You can go to tab
“Configuration” -> “Status” -> “System” to check whether “PPP” indicator is “ON” (ON means PPP connection
established).
4. R3000 can connect to Internet now.