Blaupunkt CD51 - Manual (Page 13)

13
FRANÇAIS
ENGLISH
ESP
AÑOL
PORTUGUÊS
➮
Press the or button
:
to set
the country/region.
When you have finished making your
changes,
➮
press the MENU button
8
or OK
;
twice.
Note:
●
Once you have configured the tun-
er, the unit will switch to radio
mode and tune into the preset fre-
quency 87.5 MHz
Setting the display
In radio mode, you have the option of
continuously displaying the time or con-
tinuously displaying the frequency.
➮
Keep the / DIS button
7
pressed until the required display
appears.
RADIO MODE
CD mode
You can use this unit to play standard
CDs with a diameter of 5 inches.
Risk of damage to the CD drive!
CD singles with a diameter of 3 inch-
es and contoured CDs (shape CDs)
are not suitable for playback in this
unit.
We accept no liability for any dam-
age to the CD drive that may occur
as a result of the use of unsuitable
CDs.
Switching to CD mode
●
If there is no CD inserted in the
drive,
➮
press the button
9
.
The flip-release panel opens.
➮
Gently insert the CD with the print-
ed side uppermost into the drive
until you feel some resistance.
The CD is drawn into the drive automat-
ically.
You must not hinder or assist the drive
as it draws in the CD.
➮
Gently close the control panel
whilst exerting a little pressure until
you feel it click into place.
CD playback begins.
●
If a CD is already inserted in the
drive.
➮
Keep pressing the CD•C button
@
until “CD” appears in the display.
Playback begins from the point at which
it was last interrupted.
CD MODE