Purus Minimax Two Part-Vinyl - Manual (Page 2)

P
u
ru
s -
U
K
-
Installation
instruction Minimax
50
Two
Part
V
inyl -
0
2
8
3
2
-
2
0
1
2
0
2
1
3
2
Installation:
Connect the outlet section (7) securely to the waste pipe
system to ensure no leaks.
Test for leaks before proceeding.
Support the outlet section (7) of the floor gully vertically
before laying the floor former tray and floor boards.
Grab the outlet section (7) with one hand and start
screwing on the middle section (5). Then continue
using the installation tool.
Screw down the middle section (5) firmly with the
installation tool so that the middle (5) and the outlet
sections (7) are fully fixed together.
Remember to remove the installation tool (8)
from the floor gully.
!
7
8
5
This document must not be copied without our written permission
,
and the contents thereof must not be imported to a third party
nor
be used for any unauthorized purpose. Contravention will be prosecuted. Purus AB
Denna handling får ej utan vårt medgivande kopieras. Den får ej heller delgivas annan eller eljest obehörigen använd
as.
Överträdelse härav beivras med stöd av gällande lag. Purus A
B
Tel 0416 - 257 00 Fax 0416 - 257 20
Purus AB Södergatan 7
52719_Monteringsanvisning Two Part MiniMax 50 (Vinyl)
1(1)
- - -
Assembly
1:20
2011-10-25 SwS
- - -
-
-
-
1
- E
Artikel nr Benämning
Blad
Ersatt av / Utgången datum Denna ersätter
Godkänd sign. datum
Konstruktör Material
Skala
Skapad datum
Generell tolerans. ISO 2768-1
Utgåva
Vikt (gram) Volym (cm3)
Ytbehandling
Kommentar
275 31 SJÖBO
www.purus.se
A3
1
2
3