Powertrax 9220881005 User Manual
Page 17
15
pinion shaft opening
34.
Insert 2nd c-clip through c-clip
slot in driver onto axle shaft; pull
axle shaft out to seat c-clip.
35.
Making sure drivers stay
engaged with couplers, carefully
rotate both wheels backwards 1/4
turn to expose pinion shaft opening.
pinion shaft open-
36.
Feel through pinion shaft open-
ing and verify both spacers and
drivers are fully seated onto cou-
plers. Press down on thrust slugs
so that they are seated against the
axle ends. Verify all 8 saddle
springs are fully seated in
holes.
saddle springs