Powertrax 9207762885 User Manual
Page 20
45.
Using the retaining bolt as a
handle, insert the shaft into the dif-
ferential. Press hard while twisting
to pass shaft by springs.
46.
Insert retaining bolt into
case/shaft. Tighten retaining bolt
firmly.
18
44.
Keeping couplers and drivers
stationary, rotate case 1/4 turn for-
ward to align pinion shaft openings.
If excessive force is required, the spacer paddle
may not be aligned with the paddle opening in
synchro ring. Verify alignment and ensure
driver/spacer/half block is fully seated on coupler
before proceeding.