Powertrax 9207762805 - Manual (Page 13)

23. In order to check the clearance
inside the differential case, tem-
porarily set the second coupler onto
the block, and place the gage ring
and cap onto the coupler as shown.
There should be a gap between the
two halves of the differential case.
11
25. If the gap is correct, remove the
cap, gage ring, and coupler to pro-
ceed.
gage ring
24.
Check the gap in the differen-
tial case using the gage block.
The narrow side of the block
should fit in the gap, but the
wider side should not fit.
Go No Go
cap
If gap is incorrect, STOP and call
Powertrax Technical Support at
864-843-9275.
There may be a
problem with your differential case.