Powertrax 9206882826 - Manual (Page 7)

5
6. Remove differential cover and
drain fluid. Clean the diff cover and
housing sealing surface.
8. Expose pinion shaft;remove
retaining bolt/roll pin and shaft.
Note: In differentials with very low gear
ratios (numericaly high), the ring gear thick-
ness may prevent the removal of the pinion
shaft. If this occurs, the differential case
must be removed from the car and the ring
gear must be taken off before proceding.
Please refer to your vehicle’s repair manual
for instructions on how to remove the case
and ring gear.
7.
Remove the axle retaining bolts
located on the inside of the brake
backing plates. Pull out both axle
shafts approximately 8”.