PLX Devices SM-FP - Manual (Page 5)

Users Guide: iMFD Sensor Module
Version 1.0 March 14, 2008
www.plxdevices.com
(408)745-7591
Recommended Accessory:
(Figure 10)
DM-5 Fluid Pressure 52mm Gauge. Ideal for affordable Fluid Pressure
monitoring from your SM-FluidPressure. Release date will be updated.
Included Items:
1. SM-FluidPressure main unit
2. 4ft red power wire
3. 4ft black ground wire
4. 4ft gray analog output wire
5. 2.1mm power connector
6. Resistive type fluid pressure sensor (Additional sensor
sold separately)
7. 24k gold ring terminal
8. 24k gold female disconnect terminal
9. 2 pin Molex connector with 2 terminals for sensor
10. 16ft sensor wire
11. 4 pin Molex connector with 4 terminals for analog output
12. 1ft Serial Cable
13. Termination jumper
14. Quick start guide
Specifications:
Physical Dimensions 2" x 2.875" x 1.125" (52mm x 75mm x 28mm) L x W x H
Accuracy ~1 PSI
Measurement Range 0-150 PSI
Analog Outputs Linear 0-5V (Driving Current 20mA)
Operating Voltage 8V-18V
Power Consumption 0.3 Watts
Operating Temperature 0 - 85 Deg C
Sensors Two Resistive Type Pressure Senders
Enclosure Extruded Aluminum
TERMS OF USE
PLX Devices Inc. does not guarantee the Sensor Module functionality with any ECU, data logger or other devices that uses the output
signals. Implementation and integration of the Sensor Module with any other device(s) must be done at your own risk. Improper
installation and usage may lead to engine damage. Mount and install the Sensor Module in a location where it does not obstruct the
driver’s view and/or ability to safely control the vehicle.