Phoenix Audio Duet PCS (MT202-PCS - Manual (Page 4)

USING THE DUET
The Duet’s control panel has three buttons:
•
Mute (in the middle).
•
Volume Up (to the right).
•
Volume Down (to the left).
LIGHT INDICATIONS:
•
Button panel light off - unit is off (not connected).
•
Button panel light on – unit is on (connected).
•
Button panel light blinking – unit is on and the microphone is muted.
BASIC UNIT OPERATIONS:
•
Turn unit ON: unit is always on when connected to a power source or USB device.
•
Turn unit OFF: disconnect unit from power source or USB device.
•
Mute microphone: push the Mute button once. The button panel light will start blinking.
•
Unmute microphone: push the Mute button once. The button panel light will stop
blinking and will stay on.
NOTE: The MUTE button will mute the microphone not the speaker. To mute the
speaker, just use the volume buttons to decrease the volume until no sound is
audible. The volume buttons will control the level of audio heard from the speaker
and not the sensitivity of the Duet’s microphone. To adjust the microphone volume
level, use the Phoenix Audio Setup Utility, which can be found on our website.