Phoenix Audio Quattro3 MT305 - Manual (Page 4)

USING THE QUATTRO3
The Quattro3’s control panel has 5 buttons:
• Power / Mute button (in the middle) – see details of operation below
• Volume Up and Volume Down
• L1 - Increase microphone
sensitivity
• L2 - Decrease microphone
sensitivity
NOTE: Over sensitive microphone settings will cause distortion.
LIGHT INDICATIONS:
• Power / Mute button light off – unit is off
• Solid Power / Mute light – unit is on
• Blinking Power / Mute light – unit is on and the microphones are muted
BASIC UNIT OPERATIONS:
• Turn unit ON: push the Power / Mute button. The light will turn on
• Turn unit OFF: push the Power / Mute button and hold for 3 seconds. The unit will beep
4 times and turn off. The light will turn off
• Mute microphones: push the Power / Mute button once (for less than three seconds)
The light will start blinking
• Unmute microphones: push the Power / Mute button once (for less than three seconds)
The light will stop blinking and will stay on
NOTE: The unit can be turned off from both the “ON” and “MUTE” positions. In both cases,
turning off requires pushing and holding the button for about 3 seconds.
control panel