Oxford Garden Adirondack Chair - Manual (Page 2)

On a clean flat surface, lay seat assembly 4 flat on the ground.
Step 1
Using 4 bolts, attach the back assembly to the seat.
Step 3
Using two bolts, attach one arm to the leg and to the brace
on the back assembly. (Arched cutout of the arms face inward.)
Step 2
Carfully lay the chair on its side. Using an allen wrench, you will now
start to assemble the remaining pieces with the remaining bolts. Wait
until all parts are together before you completely tighten the bolts.
Leave them a bit loose until the last step. Using three bolts, attach
one leg to the seat assembly. (Leg will be positioned with the arm
brace facing upward and to the front of the seat assembly.)
Step 5
Using an allen wrench, completely tighten all screws.
Assembly Instructions
page 2
Adirondack Chair
A A A
Step 4
Turn chair onto its other side. Repeat steps 2-3 to secure the other
leg and arm.
4
3
3
6
A
A
A
A
A
2
2
6