BT Quartet Diverse 2015 - Manual (Page 20)

Using and changing the
system code and handset
PIN
As a digital phone system, your
Diverse 2015 provides excellent
security against others ‘listening in’
to your calls. You can also prevent
unauthorised use of the handset(s).
Each handset needs to be
registered with the base station. To
do this you need to know and use
the system code.
The default setting for both the
system code and handset PIN is
0000. If you do not wish to change
either, you can use this number for
all code and PIN - related functions.
If you want to use remote access
(i.e. call your Diverse 2015 from
another phone to play back your
messages) you will need to change the
system code from 0000.
For instructions on using remote access,
see page 36.
To change a system code for the
Diverse 2015 base station
This protects your settings and
helps prevent unauthorised
handsets using your system.
The default setting for the system
code is 0000. You can change this to
any 4-digit number.
Handset power must be switched to
ON . And you must be in range of
the base station.
• Press the STO button then the #
button.
• Press 8 on the keypad.
• Press the
✱
button.
• Enter the current system code
(default
0000).
• Enter the 4-digit code you want.
• Confirm the code by entering it
again.
• Press the STO button. The code
is now entered.
• A long beep will confirm the new
setting.
STO
#
8
TUV ✱
Using your Diverse 2015 telephone
16