Orbit Baby Generation-one Bassinet - Manual (Page 8)

14
14
Using Y
our Bassinet
Using Y
our Bassinet
15
15
The Restraint Harness is designed to wrap
around your infant’s torso while lying in the
Bassinet.
1. After you’ve positioned your infant in
the Bassinet, CLICK the end of the
strap into the Restraint Harness buckle
(Photo F).
2. Adjust the Restraint Harness to be snug
around your infant (Photo G).
To release the Restraint Harness:
1. Squeeze the side tabs on the buckle
and slide the end of the strap free
(Photo H).
2. Grasp the Bassinet by the Side Handles,
align the Hub (Photo D), and squeeze
the Release Levers. Press the Bassinet
fi rmly into place onto the SmartHub until
you feel and hear a CLICK (Photo E).
3. Rotate the Bassinet into one of its
rotational locking positions.
4. CHECK that the Bassinet is docked
securely by pulling upwards on it.
Unless you are pulling the Release
Levers, the Bassinet should not rotate
out of position or come free of the
SmartHub.
To undock the Bassinet:
1. Grasp the Bassinet fi rmly by BOTH Side
Handles.
2. Lift the Bassinet while squeezing both
Release Levers.
Docking & Undocking the Bassinet cont’d Using the Restraint Harness
F
G
H
D
E