Orbit Baby G3 Rocker Base - Manual (Page 6)

6 – ENGLISH – Manual Text Booklet – Orbit Baby Rocker Base
Getting Started
Assembling Your Rocker Base
⃞ Start with one of the metal rocker tube pieces and insert both tube ends into the SmartHub of the
rocker tube as shown.
⃞ Press the rocker tube into the SmartHub until the silver buttons on both sides have snapped into
the plastic holes. Repeat this step with the other rocker tube.
⃞ CHECK the security of the assembly by pulling outward on the rocker tube. Place the rocker
base on the ground and apply weight. The rocker tubes will flex, but not release from the
SmartHub.
Assembly of the Orbit Baby Rocker Base is now complete.