Pairing – Brookstone 683417 User Manual

Page 11

POWErINg Off aNd ON

1 . To power the transmitter off, press and hold the POWER button for 5 seconds

(the power LED will go off) .

Note: depending upon your audio setup, you may have to unplug the cable
to your TV, computer, etc. to restore normal speaker operation.

2 . To power the transmitter on, press and release the POWER button .

PaIRInG

You will need to pair the HEADPHONES and the TRANSMITTER the first time

you use them with an audio source .

1 . Connect the TRANSMITTER to a power source . The TRANSMITTER’s power

LED will illuminate .

2 . Push in and hold the CONNECT button on both the HEADPHONES and the

TRANSMITTER . The CONNECT button LED on the TRANSMITTER will blink

fast while pairing . When a beep is heard, release the buttons . The pairing is
finalized when a long beep is heard .

3 . Now connect the TRANSMITTER to an audio source and play an audio track .

Both the CONNECT button on the TRANSMITTER and the POWER button

on the HEADPHONES will illuminate solid .

4 . When listening to this same audio source again, the HEADPHONES will

automatically pair with the TRANSMITTER connected to that audio source .

Note: The TraNSmITTEr will pair with only one set of

HEADPHONES

5”

t:1

rin