One for All SV 1620 Smart HDMI switch - Manual (Page 3)

7
General
• Only use certified HDMI devices that are tested by Authorized Test Centers.
• Only use certified HDMI cables that support the required transmission speed. High Speed HDMI cables are recommended.
Poor or no picture / sound
• Make sure the power adapter of the ONE FOR ALL Smart HDMI Switch is properly connected and the power LED is lit.
• Make sure the HDMI cables are properly connected.
• Make sure your sources and display are supporting the required resolutions.
• Make sure the HDMI sources and display support HDCP (High-Bandwidth Digital Content Protection).
• If your 3D content doesn’t show, make sure your 3D source and display are fully supporting the same 3D format.
• Connect your source devices directly to your display device (e.g. HDTV) - without the ONE FOR ALL Smart HDMI Switch. This allows
you to determine which device causes the issue.
Automatic switching doesn’t work
• The ONE FOR ALL Smart HDMI Switch uses different methods to detect if it needs to switch automatically. Which method it uses
depends on the source device. The safest way to make sure the ONE FOR ALL Smart HDMI Switch automatically switches is to make
sure all source devices are turned off. Next, turn on the desired source device and make sure it displays a picture. The ONE FOR ALL
Smart HDMI Switch will automatically select this source device.
• If you’re device supports HDMI-CEC, make sure it is enabled. Please see the devices user manual for instructions how to do this.
NOTE: HDMI-CEC is better known by their respective brand names, such as Anynet+(Samsung), SimpLink(LG), Easylink(Philips), BRAVIA
Theatre Sync (Sony), VIERA Link (Panasonic), etc.
• Try to manually select the desired source device using the Input button. If this works properly, turn off the source device, wait a few
seconds and turn it on again to see if the source device is now selected automatically.
Please follow the manual instructions carefully. For questions regarding this product please contact:
• [email protected]
• www.oneforall.com
Trouble-shooting
We, Universal Electronics Inc., 6101 Gateway Drive, Cypress, CA 90630, U.S.A., and its subsidiaries
Universal Electronics BV, Institutenweg 21, 7521 PH Enschede, Netherlands, ONE FOR ALL GmbH, Fabrikstraβe 3, 48599 Gronau,
Germany, ONE FOR ALL UK Ltd, Institutenweg 21, 7521 PH Enschede, Netherlands, ONE FOR ALL IBERIA S.L., Gran Via, Carlos III, no 84, 3a
planta, Barcelona, Spain, ONE FOR ALL ARGENTINA S.R.L., AV. Las Heras 2126, 5th Floor (Suite “C”) ZC 1111, Recoleta, Buenos Aires,
Argentina, Universal Electronics Italia S.r.l., Via Cerva, 18, 20122 Milano, Italia
Declare under sole responsibility that the ONE FOR ALL Smart HDMI Switch (SV 1620) to which this declaration relates is in conformity
with:
Council Directive 2004/108/EC (EMC Directive)
EN 55022:2006+A1:2007: Class B
IEC61000-3-2:2005+A1:2008+A2:2009
IEC61000-3-3:2008
EN 55024:1998+A1:2001+A2:2003
IEC61000-4-2:2008
IEC61000-4-3:2006+A1:2007
IEC61000-4-4:2004
IEC61000-4-5:2005
IEC61000-4-6:2008
IEC61000-4-8:1993+A1:2000
IEC61000-4-11:2004
Council Directive 2006/95/EC (Low Voltage Directive)
EN 60950-1:2006+A11:2009 + A1:2010
Enschede, 6th of January 2012
Paul J. Bennett
As Managing Director Europe, Executive Vice President International
CE DECLARATION OF CONFORMITY
708774_HDMI_switch_RDN-1090312_INT.PAG.:SV-1620 09-03-12 10:21 Pagina 7