Northern Connectors Kompress Cable Ties & Fixings - Manual (Page 2)

CABLE TIES A
2
Kompress Cable Ties are produced to comply with the requirements of Military Specification MIL-S 23190E
and supplied in accordance with our ISO 9002 accreditation.
They have a working temperature of -40ºC + 85ºC and are primarily manufactured from virgin nylon 66 in
natural colour, unless specified otherwise, as indicated as below. Kompress Cable Ties are normally supplied
in packs of 100 pieces.
Most cable ties and accessories are available in black colour. Suffix BL should be added for black products.
Many sizes of nylon ties are also available in red, blue, orange, green, yellow, silver grey, purple and other
colours. Consult Kompress for details.
Most cable ties and accessories widths up to 3.6mm are also available in bulk packs of 1000. If these are
required add suffix M.
If Cable Ties are to be installed in conditions of high UV radiation, an increased weather resistant version can
be obtained. That is achieved by the addition of carbon black stabiliser additive to the Nylon 66 polymer
which produces a black UV stabilised product. If this is required add suffix UV to part number. If higher
operating temperature is required (110ºC) add suffix HSUV.
These products are available only in packs of 100 pieces
The Kompress part numbering system has been carefully devised to help the specifier understand and
recognise each element of the code. This simple part numbering system makes specifying easy without
constant reference to the catalogue.
This is how the part number is created-
If the variations listed above are required add appropriate suffix.
=
KCT (Kompress Cable Tie). 200 (Length mm). 4.8 (Width mm). BL (Black Colour). M (Bulk Pack).
SPECIFICATION
NYLON CABLE TIES
BLACK AND OTHER COLOURS
BULK PACKS
HS UV STABILISED (WEATHER RESISTANT) BLACK
HOW TO SPECIFY
e.g. KCT 100 - 2.5BL
e.g. KCT 100 - 2.5M
e.g. KCT 300 - 4.8UV
e.g. KCT 200 - 4.8BLM