Northern Connectors Conec D-Sub Filter Adapters, Filter Plates - Manual (Page 3)

2 4 A O 3 1105 X
4|2
Product Line
Design
3 = Adapter, standard DWV
4 = Adapter, high DWV
9* = Adapter, ultra high DWV *on request
Quality class for contacts
A = Quality class 3 50 mating cycles
B = Quality class 2 200 mating cycles
C = Quality class 1 500 mating cycles
Serial number
Design
OX = Standard design
Part Number Creator
Filter D-SUB Adapters, Filter Plates
Increasing requirements, with respect to higher DWV for filter connectors, have induced us to carry out advanced development in this direction.
CONEC is capable of delivering filter connectors with DWV of 1500 VDC.
The various DWV ratings are as follows:
1
Standard DWV ................ 300 424 VDC
2 High DWV.................................... 707 VDC
3 Ultra high DWV........... 1000 1500 VDC (on request)
Furthermore, the filter connector can be designed for ultra high DWV of up to 2500 VDC at 10/700 pulse voltage.
Filter connectors so designed fulfill the standards established according to CE requirements, i.e. 1414 VDC.
For example, capacity ratings range from 180 pF to 1300 pF for standard series.
Special capacitiance values are also available.
Filter connectors for higher DWV