Northern Connectors Conec IP67 Combination D-Sub Connectors - Manual (Page 4)

7|3
Technical data
Mechanical and electrical
characteristics
Coaxial contacts High power contacts
Polyester GF PTFE
(UL 94V-O)
Brass tin plated
Gold plated over nickel
CU alloy
CU alloy CU alloy
7.5 A (UL) 5 A (CSA, VDE)
1000 V, 50Hz
1 min.
≤ 2.7mΩ
5GΩ ≤ 1GΩ 5GΩ
10 16 Ωcm
50KV mm
50 75Ω
≤ 2.7mΩ ≤ 2.7mΩ ≤ 1mΩ
≤ 1.2
≤ 1.3
≤ 1.5
750 V 50Hz
0-2GHz
250 V 250 V
-25°C to +105°C
Requirements according to IEC 60529 – IP67
≤ 3.4N ≤ 7N ≤ 7N
≤ 0.2N ≤ 7N ca. 5N
A = Quality class 3 = 50 mating cycles
B = Quality class 2 = 200 mating cycles
C = Quality class 1 = 500 mating cycles
Insulator
Shell
Contact plating
Contact material
Retaining clip
Current rating
Test voltage between 2 contacts
shell and contact
Resistance between mated contacts
Insulation resistance
Volume resistivity
Dielectric with standing voltage
Impedance
Contact resistance inner- outer conductor
VSWR-value at according MIL-C-39012 1.2GHz
1.5GHz
2.0GHz
Dielectric with standing voltage
Frequency range
Working voltage
Temperature range
Degree of protection
Insertion force per signal contact
Extracction force per signal contact
Quality class
Technical alterations are subject to change without notice.
IP67 Combination D-SUB Connectors
Signal contacts