Northern Connectors Conec RJ45 Jack with Magnetic Filter - Manual (Page 4)

11|3
Polyester glass filled, black, UL94 V-O
Nylon 46 glass filled, black, UL94 V-O
.008" 0.20 mm thick copper alloy
.014“ 0.35 mm thick copper alloy
50μ" 1.27 μm gold min. over 30μ“ 0.76 μm min. nickel
Tin plated
Min. 350 μH at 8mA DC bias
Max. 0.35 μH
Max. 25 pF
Max. 1.0 Ω
1:1 1:1 ± 3% or Tx Rx = 1:1.414 1:1 ± 3%
3.0 ns (typical)
Max. 22 N
Min. 89 N
Min. 1 000
Max. 20 mΩ
Min. 1000 mΩ
1 500V ms (Signal to Shield)
Max. 0,05A
0.1-100 MHZ 1.0 dB max
0.1-30 MHZ 20.0 dB Type
60 MHZ 15.0 dB Type
80 MHZ 12.0 dB Type
0.1-30 MHZ 50.0 dB Type
60 MHZ 45.0 dB Type
100 MHZ 40.0 dB Type
60 MHZ 40.0 dB Type
100 MHZ 35.0 dB Type
60 MHZ 35.0 dB Type
100 MHZ 30.0 dB Type
1500 Vrms 60 sec.
Green Yellow
565 nm 585 nm
2.6 V (max) 2.6 V (max)
2.1 V (Type) 2.0 V (Type)
5.0 V (Type) 5.0 V (Type)
15 mcd (min) 20 mcd (min)
25 mcd (Type) 30 mcd (Type)
Technical Data
Housing, solder pin, straight
Housing, SMT-Termination
Shielding
Contact material
Mating area plating
Solder tails plating
OCL (Open Circuit Inductance)
Leakage inductance
Inter-winding capacitance
DC-Resistance
Turns ratio
Rise time and fall time
Mating force
Retention force
Mating cycles
Contact resistance
Insulation resistance
Dielectric with standing voltage
Current rating
Insertion loss
Return loss
Next near and cross talk
Differential to common mode rejection
Common mode rejection ration
Hi-Pot
Color
Wave length
Forward voltage with I
F
=20 mA
Reserve voltage with I
R
=10 µA
Luminous intensity with I
F
=20 mA
Specifications
Spezification at 25°C
(Operating temperature -40°C to +85°C)
Standard-LED
RJ45 Modular Jack with Magnetic Filter