Blaupunkt San Diego DJ31 - Manual (Page 17)

40
Repeating tracks
➮
Press button 3 (RPT)
=
.
The current track is repeated. RPT ap-
pears in the display. When the end of
the track is reached and the tape is re-
winding, “RPT TRCK” appears in the
display.
To stop repeating the track,
➮
press button 3 (RPT)
=
again.
Normal playback is then continued. RPT
disappears from the display.
Scanning all the tracks on a
cassette (SCAN)
➮
Press the SCAN button
4
.
“CAS SCAN” appears in the display. All
the tracks on the cassette are briefly
played in ascending order.
To stop scanning,
➮
Press the SCAN button
4
again.
The current track will then continue to
be played.
Note:
●
You can set the scanning time. For
further details, read the section en-
titled “Setting the scantime” in the
“Radio mode” chapter.
●
In order for the S-CPS, RPT and
SCAN functions to work properly,
there must be a pause of at least
three seconds between each track
on the cassette.
Pausing playback (PAUSE)
To pause the cassette whilst it is play-
ing,
➮
press button 2 ( )
=
.
Playback is paused and “PAUSE” ap-
pears in the display.
➮
Press button 2 ( )
=
again to
cancel pause.
Switching radiomonitor on/off
Note:
●
You can switch the radiomonitor on/
off whilst a cassette is playing.
➮
Press the MENU button
<
.
➮
Keep pressing the or button
;
until “RM ON” or “RM OFF” ap-
pears in the display.
➮
Press the or button
;
to
switch the radiomonitor on/off.
When you have finished making your
changes,
➮
press the MENU button
<
.
Skipping blank spaces
(blankskip)
You can automatically skip blank spac-
es on the tape that are longer than ten
seconds. To do so, the “blankskip” fea-
ture must be activated.
Note:
●
You can switch “blankskip” on/off
whilst a cassette is playing.
CASSETTE MODE