Multiquip SFCG1 SERIES - Manual (Page 12)

PAGE 12 — SFCG1 CONCRETE SAW— OPERATION & PARTS MANUAL — REV. #2 (03/15/04)
SFCG1 CONCRETE SAW— OPERATION AND SAFETY DECALS
Figure 2. SFCG1 Concrete Saw Decals
Machine Operation And Safety Decals
The SFCG1 Concrete Saw is equipped with a number of safety decals (Figure 2). These decals are provided for operator safety and
maintenance information. Should any of these decals become unreadable, replacements can be obtained from your dealer.
P/N 36099 (ISO Blue)
P/N 35210
P/N 25427
DECAL SHEET INTL STDS
P/N 11246
LUBRICATION CHECK HOT BELT DRIVE
P/N 15581 P/N 15580
P/N 25491
Always use approved
respiratory protection. Adhere
to safety guidelines. OSHA
Regulations (Standards-
29 CFR) 1926.136 &1910/103
WARNING
Never operate the saw without
the guards in place. Adhere to
safety guidelines: ANSI Code
29 CFR) 1910.215.
WARNING
DEPTH
CONTROL
1
2
3
4
In (mm)
(102)
(76)
(51)
(25)
R
OTATIO N
P/N 22972-003
P/N: 13118
P/N 35137
To avoid injury,
you MUST read
and understand
operator’s manual
before using this
machine.
Ask for training
as needed.
This machine to
be operated by
qualified
personnel only.
P/N 35137
WARNING
MODEL
SERIAL NO.
Engine exhaust and some of
its constituents, and some dust created
of California to cause cancer, birth
defects and other reproductive harm.
by power sanding, sawing, grinding,
drilling and other construction activities
contains chemicals known to the State
Some examples of these chemicals are:
Lead from lead-based paints.
Crystalline silica from bricks.
Cement and other masonry products.
Arsenic and chromium from chemically
treated lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to
these chemicals:
work in a ALWAYS
well ventilated area, and work with
approved safety equipment, such as
dust masks that are specially designed
to filter out microscopic particles.
CONTACT
SERVICE
DEPARTMENT
P/N 20525
P/N 25867