Multiquip PS403030 - Manual (Page 18)

PAGE 18 — MQ PS4030 SAW • OPERATION MANUAL — REV. #0 (02/29/08)
MQ PS4030 SAW — OPERATION AND SAFETY DECALS
Machine Safety Decals
The MQ PS4030 SAW is equipped with a number of operation and safety decals. These decals are provided for operator safety and
maintenance information. Should any of these decals become unreadable, replacements can be obtained from your dealer.
Figure 3. MQ PS4030 SAW Decals
MODEL
SERIAL NO.
P/N 36099 (ISO Blue)
KEEP HANDS
CLEAR
WARNING!
KEEP FEET
CLEAR
WARNING!
When Larger Blade and Guard
is Installed, Belt Drive MUST
Be Changed to Proper Size.
See Owners Manual.
S.M.I. MASONRY AND CONCRETE
SAW MANUFACTURER’S INSTITUTE
CAUTION
FAILURE TO COMPLY WITH THE C C AH
JADV EEE AV EEA OIEJGGVCBVVZ
P/N 25249-001
P/N 23330-001
P/N 25250-001
P/N 11246
(Sheet-Intl. Stds)
RO
TATIO
N
RO
TATIO N
P/N 25491
P/N 25678
P/N 22122-001
CONTACT
SERVICE
DEPARTMENT
P/N 13118
P/N 606004
P/N 20525
DO NOT OPERATE SAW
WITHOUT PROPER TRAINING
& FULL UNDERSTANDING
OF THE OWNERS MANUAL
HEARING
PROTECTION
KEEP ALL
GUARDS IN
PLACE
EYE OR FACE
PROTECTION
HEAD
PROTECTION
RESPIRATOR
TO PREVENT SERIOUS INJURY
WHEN OPERATING THIS MACHINE
ALWAYS WEAR SAFETY APPROVED
MASONRY AND CONCRETE
SAW MANUFACTURING INSTITUTE
SMI
WARNING
P/N 35137
P/N 11912
P/N 21302
Engine exhaust and some of
its constituents, and some dust created
of California to cause cancer, birth
defects and other reproductive harm.
by power sanding, sawing, grinding,
drilling and other construction activities
contains chemicals known to the State
Some examples of these chemicals are:
Lead from lead-based paints.
Crystalline silica from bricks.
Cement and other masonry products.
Arsenic and chromium from chemically
treated lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to
these chemicals:
work in a ALWAYS
well ventilated area, and work with
approved safety equipment, such as
dust masks that are specially designed
to filter out microscopic particles.
CHECK HOT BELT DRIVE LUBRICATION
P/N M600002
PATENT PENDING
P/N 37540
P/N 37540
API SERVICE CI- 4 PLUS, CI- 4, CH- 4,
CG- 4, CF- 4, CF/SL/SJ
USE 15W- 40 ENGINE OIL
P/N 37742
P