beautypg.com

Hs81a cut-off saw — safety message alert symbols – Multiquip HS81A User Manual

Page 6

background image

PAGE 6 — HS81A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #2 (07/26/10)

HS81A CUT-OFF SAW — SAFETY MESSAGE ALERT SYMBOLS

Safety precautions should be followed at all times when operating
this equipment. Failure to read and understand the Safety
Messages and Operating Instructions could result in injury to
yourself and others.

FOR YOUR SAFETY AND THE SAFETY OF OTHERS!

HAZARD SYMBOLS

Engine exhaust gases contain poisonous

carbon monoxide. This gas is colorless and

odorless, and can cause death if inhaled.

NEVER operate this equipment in a confined

area or enclosed structure that does not

provide ample free flow air.

Gasoline is extremely flammable, and its
vapors can cause an explosion if ignited. DO
NOT
start the engine near spilled fuel or
combustible fluids. DO NOT fill the fuel tank

while the engine is running or hot. DO NOT
overfill tank, since spilled fuel could ignite if it
comes into contact with hot engine parts or

sparks from the ignition system. Store fuel in
approved containers, in well-ventilated areas
and away from sparks and flames. NEVER
use fuel as a cleaning agent.

Burn Hazards

Engine components can generate extreme heat.
To prevent burns, DO NOT touch these areas
while the engine is running or immediately after
operations. NEVER operate the engine with
heat shields or heat guards removed.

Rotating Parts

NEVER operate equipment with covers, or
guards removed. Keep

fingers, hands, hair

and

clothing away from all moving parts to

prevent injury.

Explosive Fuel

Lethal Exhaust Gases

This Owner's Manual has been
developed to provide complete
instructions for the safe and efficient
operation of the MULTIQUIP MODEL
HS81A

CUT-OFF SAW. For engine

maintenance information, please refer

to the maintenance section of this manual for data relative to its safe
operation.

Before using this SAW, ensure that the operating individual
has read and understands all instructions in this manual.

NOTE

SAFETY MESSAGE ALERT SYMBOLS

The three (3) Safety Messages shown below will inform you
about potential hazards that could injure you or others. The
Safety Messages specifically address the level of exposure
to the operator, and are preceded by one of three words:
DANGER, WARNING, or CAUTION.

You WILL be

KILLED or SERIOUSLY injured if you DO

NOT follow directions.

You CAN be

KILLED or SERIOUSLY injured if you DO

NOT follow directions.

You CAN be

INJURED if you DO NOT follow directions.

DANGER

WARNING

CAUTION