Multiquip BP25H User Manual

Page 27

BP-25H GASOLINE VIBRATOR — OPERATION MANUAL— REV. #7 (12/19/07) — PAGE 27

BP-25H GAS VIBRATOR — PREPARATION FOR LONG -TERM STORAGE

For storage of the vibrator for over 30 days, the following is
required:

■ Drain the fuel tank completely, or add STA-BIL to the fuel.
■ Run the engine until the gasoline in the carburetor is

completely consumed.

■ Completely drain the oil from the crankcase and refill with

fresh oil.

■ Remove the spark plug, pour 2 or 3 cc of SAE 30 oil into the

cylinder and crank slowly to distribute the oil.

■ Slowly rotate the engine a few times with the starter rope and

install a new plug.

■ Pull out the starter rope slowly and stop at the compression

point.

■ Clean all external parts of the engine and frame with a soft

cloth.

■ Cover the unit and store in a clean, dry place.