Multiquip DS-Series (CHINA) User Manual
Page 6
PAGE 6 — DS-SERIES DUOSCREED — PARTS & OPERATION MANUAL — REV. #0 (09/19/01)
l
DS-SERIES DUOSCREED — RULES FOR SAFE OPERATION
CAUTION:
Failure to follow instructions in this manual
may lead to serious injury or even death!
This equipment is to be operated by trained
and qualified personnel only! This
equipment is for industrial use only.
The following safety guidelines should always be used when
operating the DuoScreed
GENERAL SAFETY
■
DO NOT operate or service this
equipment before
reading this entire manual.
■
This equipment should not be operated by persons under 18
years of age.
■
NEVER operate this
equipment without proper
protective clothing,
shatterproof glasses, steel-
toed boots and other
protective devices required
by the job.
■
NEVER operate this
equipment when not
feeling well due to fatigue,
illness or taking
medicine.
■
NEVER operate this equipment
under the
influence or drugs or alcohol.
■
NEVER use accessories or attachments, which are not
recommended by Multiquip for this equipment. Damage to
the equipment and/or injury to user may result.
■
Manufacturer does not assume responsibility for any accident
due to equipment modifications.
■
Whenever necessary, replace nameplate, operation and
safety decals when they become difficult read.
■
Always check the machine for loosened threads or bolts before
starting.
■
Always refuel in a well-ventilated area, away from sparks and
open flames.
■
Always use extreme caution when
working with flammable liquids. When
refueling, stop the engine and allow it
to cool. DO NOT smoke around or near
the machine. Fire or explosion could
result from fuel vapors, or if fuel is spilled
on a hot engine.
■
NEVER operate the DuoScreed in an explosive atmosphere
or near combustible materials. An explosion or fire could result
causing severe
bodily harm or even death.
■
Topping-off to filler port is dangerous, as it tends to spill fuel.
■
NEVER touch the hot exhaust
manifold, muffler or cylinder.
Allow these parts to cool before
servicing engine or Duoscreed.
■
The DuoScreed engine requires an adequate free flow of
cooling air. Never operate the DuoScreed in any enclosed or
narrow area where free flow of the air
is restricted. If the air flow is restricted
it will cause serious damage to the
DuoScreed or engine and may cause
injury to people. Remember the
DuoScreed's engine gives off DEADLY
carbon monoxide gas.
■
High Temperatures – Allow the engine to cool before adding
fuel or performing service and maintenance functions. Contact
with
hot
components can cause serious burns.