Caution, Rules for safe operation – Multiquip MS40M User Manual

Page 8

PAGE 8 — STOW MS-40M— PARTS & OPERATION MANUAL — REV. #1 (05/17/02)

CAUTION:

Failure to follow instructions in this manual may

lead to serious injury or even death! This
equipment is to be operated by trained and

qualified personnel only! This equipment is for
industrial use only.

The following safety guidelines should always be used when
operating the MS-40MSM mixer:

GENERAL SAFETY

■

Stop the engine when leaving the mixer unattended.

■

Block the unit when leaving or when using on a slope.

■

Maintain this equipment in a safe operating condition at all
times.

■

Always stop the engine before servicing, adding fuel and oil.

■

NEVER Run engine without air filter. Severe engine may
occur.

■

Always service air cleaner frequently to prevent carburetor
malfunction.

■

Always be sure the operator is familiar with proper safety
precautions and operations techniques before using mixer.

■

Always store equipment properly when it is not being used.
Equipment should be stored in a clean, dry location out of the
reach of children.

■

NEVER use accessories or attachments, which are not
recommended by Multiquip for this equipment. Damage to
the equipment and/or injury to user may result.

■

NEVER Run engine without air cleaner. Severe engine
damage may occur.

■

Always read, understand, and follow procedures in Operator’s
Manual before attempting to operate equipment.

■

Always be sure the operator is familiar with proper safety
precautions and operations techniques before using pump.

■

Always store equipment properly when it is not being used.
Equipment should be stored in a clean, dry location out of the
reach of children.

■

Caution must be exercised while servicing this equipment.
Rotating and moving parts can cause injury if contacted.

■

When towing, an adequate safety chain must be fastened to
the frame, refer to page 14.

■

Keep all inexperienced and unauthorized people away from
the equipment at all times.

■

Unauthorized equipment modifications will void all warranties.

■

Check all fasteners periodically for tightness. Also check
towing tongue bolt, lock nut and wheel lug nuts for wear.

■

Stop the engine and disconnect the spark plug before allowing
anybody’s hands in the mixing drum.

■

Never pour or spray water over the engine or electric motor.

■

Always stand clear of dump handle when mixer is in operation.
Any binding of material between the mixer blades and drum
will cause drum and handle to quickly move in the discharge
position.

■

Depending on type of mixer, test the

ON/OFF

switch for either

the gasoline engine or electric motor before operating. The
purpose of these switches is to shut down the engine or motor
of the mixer.

Emergencies

■

Always know the location of the nearest

fire extinguisher

and

first aid kit

. Know the location of the nearest telephone.

Also know the phone numbers of the nearest

ambulance

doctor

and

fire department

. This information will be

invaluable in the case of an emergency.

Maintenance Safety

■

NEVER lubricate components or attempt service on a running
machine.

■

Always allow the machine a proper amount of time to cool
before servicing.

■

Keep the machinery in proper running condition.

■

Fix damage to the machine immediately and always replace
broken parts.

■

Dispose of hazardous waste properly. Examples of potentially
hazardous waste are used motor oil, fuel and fuel filters.

■

DO NOT use food or plastic containers to dispose of
hazardous waste. Emergencies

■