Mtr-80l operation – Multiquip MTR80L User Manual

Page 14

PAGE 14 — MTR-80L — PARTS & OPERATION MANUAL — REV. #8 (06/26/01)

MTR-80L OPERATION

Fig. 1

Fig. 2

Fig. 3

9.1 Idle Adjustment

9.1-1

Adjust idle when engine is warm.

9.1-2

With the throttle in a “off” position, adjust idle screw

(Fig. 1) to approximately 1,200±100.

9.2 Pilot Adjustment

9.2-1

Turn pilot screw (Fig. 2) to closed position.

Open

approximately one full turn for smooth engine idling.

9.3 High speed Adjustment

9.3-1

Loosen adjust plate screw and adjusting lever bolt

(Fig. 3).

9.3-2

For slower speed, move stopper (Fig. 3) toward the recoil

starter.

This shortens the throttle movement.

9.3-3

To increase speed, move stopper (Fig. 3) away from

recoil starter.

This

increases the throttle movement.

9.3-4

Set engine at correct speed of approximately 3,900±

100rpm.

Tighten adjust plate screw and adjusting lever bolt.