Multiquip MTX60HD - Manual (Page 9)

MTX60hD RaMMeR • opeRaTion anD paRTs Manual — Rev. #0 (07/31/12) — page 9
saFety inFOrMatiOn
TRanspoRTing saFeTy
CauTion
„ NEvER allow any person or animal to stand underneath
the equipment while lifting.
NOTICE
„ Before lifting, make sure that the equipment parts (hook
and vibration insulator) are not damaged and screws are
not loose or missing.
„ Always make sure crane or lifting device has been
properly secured to the lifting bail (hook) of the
equipment.
„ alWays shutdown engine before transporting.
„ neveR lift the equipment while the engine is running.
„ Tighten fuel tank cap securely and close fuel cock to
prevent fuel from spilling.
„ Use adequate lifting cable (wire or rope) of suffi cient
strength.
„ Use one point suspension hook and lift straight
upwards.
„ Do noT lift machine to unnecessary heights.
„ alWays tie down equipment during transport by
securing the equipment with rope.
„ Never allow any person or animal to stand underneath the
equipment while lifting.
enviRonMenTal saFeTy
NOTICE
„ Dispose of hazardous waste properly.
Examples of potentially hazardous waste
are used motor oil, fuel and fuel fi lters.
„ Do noT use food or plastic containers to dispose of
hazardous waste.
„ Do noT pour waste, oil or fuel directly onto the ground,
down a drain or into any water source.