Purenex Multipure TO15000 - Manual (Page 6)

6
D. To Operate the TO15000 System
1. Open one cold water faucet in the house, preferably the faucet that is located nearest the TO15000
installation.
2. Turn on house water going to the TO15000 unit.
3. Press and hold red air vent button while the unit is filling with water to assure that all air
escapes from the housing. Hold the button until a steady stream of water escapes.
4. Turn off the faucet you opened in the house, and check all connections to confirm that
there are no leaks.
5. Reopen the cold water faucet in the house nearest the TO15000 installation. Allow the
water to flow to waste at the open faucet for about 3 to 5 minutes to flush the filter.
6. Then turn off the faucet that you opened.
7. Check all connections to confirm that there are no leaks.
Your TO15000 Water Treatment System is now ready to provide clean, clear water at every tap and appli-
ance throughout your home. The TO15000 System effectively reduces dirt, rust, sand, algae, and chlo-
rine, improving the smell, taste and odor, and overall quality of water for bathing or showering, and all
other household water needs.
For the highest quality drinking water, Multi-Pure Corporation recommends the installation of one of the Multi-
Pure Drinking Water Systems at the kitchen sink in addition to the Whole House Water Treatment System. Multi-
Pure's Drinking Water Systems go beyond solving aesthetic water problems; they also remove from the water
supply contaminants of health concerns.
If you have questions regarding the installation of your Multi-Pure Whole House
Water Treatment System, contact your plumber and / or call:
Multi-Pure Corporation
Customer Service Department
toll-free at 1-800-622-9206, ext. 175
email: [email protected]
www.multipure.com
red air vent
Filter Maintenance
The TO15000 Whole House Water Treatment System uses filter Model No. TO20. The life of the filter will
vary depending on the amount of water used and the level of particulate matter in the water processed.
It is recommended that filters be replaced on a regularly scheduled basis -- when the first of the following
occurs:
(a) when the flow rate diminishes, or
(b) when the filter becomes saturated with bad tastes and odors, or
(c) about every three to six months.
If you have any questions regarding the replacement of your Model TO20 filter, please call Multi-Pure’s
Customer Service Department.
For Replacement Filters: Call 1-800-622-9208 or go to
www.multipure.com/rf.htm
Other Multi-Pure Products
Multi-Pure Corporation offers other drinking water and water treatment devices designed to improve the
quality of your water. For complete information about Multi-Pure Drinking Water Systems, visit
www.multipure.com or call our Customer Service Representatives at 800-622-9206 for additional
information.
08/04