Behringer Europower PMP518M - Manual (Page 5)

5 EUROPOWER PMP518M User Manual
behringer.com
Introduction 1.
Right from the very start it has been our goal to design a revolutionary unit that
can be used for a wide variety of applications. And indeed, this overwhelming
power mixer gives you plenty of functionality and a broad range of connection
and expansion options.
Before you get started 1.1
Shipment 1.1.1
Your EUROPOWER was carefully packed at the factory and the packaging is
designed to protect the unit from rough handling. Nevertheless, we recommend
that you carefully examine the packaging and its contents for any signs of
physical damage which may have occurred during transit.
If the unit is damaged, please do NOT return it to BEHRINGER, ◊
but notify your dealer and the shipping company immediately.
Otherwise, claims for damage or replacement may not be granted.
We recommend that you use a flight case, so as to give your power ◊
mixer optimum protection during use or transport.
Always use the original packing carton to prevent damage during ◊
storage or transport.
Make sure that children cannot play unsupervised with the device ◊
or its packaging.
Please ensure proper disposal of all packing materials. ◊
Initial operation 1.1.2
Be sure that there is enough air space around the unit for cooling and, to avoid
overheating, please do not place the EUROPOWER near radiators, etc.
Blown fuses must be replaced by fuses of the same type and rating! ◊
Please refer to the “Specifications” for details.
The mains connection is made using the enclosed power cord and a standard IEC
receptacle. It meets all of the international safety certification requirements.
Please make sure that all units have proper ground connection. ◊
For your own safety, never remove or disable the ground conductor
from the unit or on the AC power cord.
The sound quality may diminish within the range of powerful ◊
broadcasting stations and high-frequency sources. Increase the
distance between the transmitter and the device and use shielded
cables for all connections.
Online registration 1.1.3
Please register your new BEHRINGER equipment right after your purchase
by visiting http://behringer.com and read the terms and conditions of our
warranty carefully.
Should your BEHRINGER product malfunction, it is our intention to have it
repaired as quickly as possible. To arrange for warranty service, please contact
the BEHRINGER retailer from whom the equipment was purchased. Should your
BEHRINGER dealer not be located in your vicinity, you may directly contact
one of our subsidiaries. Corresponding contact information is included in the
original equipment packaging (Global Contact Information/European Contact
Information). Should your country not be listed, please contact the distributor
nearest you. A list of distributors can be found in the support area of our website
(http://behringer.com).
Registering your purchase and equipment with us helps us process your repair
claims more quickly and efficiently.
Thank you for your cooperation!