Beko 2012 CX - Manual (Page 10)

EN
10
via siphon (III) and it will be wasted. In
this case, it may be necessary to refill the
softener. If the softener is condensed over
time, it may be necessary to dilute with
some water. Otherwise, condensed soft-
ener clog the siphon and block the flow.
Program Selection and Operating Your Machine |
Control Panel
I. Compartment I, the powder detergent
compartment for prewash.
II. Compartment II, the powder detergent
compartment for main washing.
III.Siphon
The softener compartment.
Start/Pause/Cancel button
Program follow-up indicator
Spin speed selection knob
Turning On/Off
You can make the machine ready for
program selection by pressing the “On
/off” button. When “On/Off” button is
pressed, “Door” LED is on meaning that
“door can be opened”. To turn off the
machine, press the “On/Off” button again.
Pressing the “On/Off” button never means
that the program is started.
1 4
3
2 5
6
Program selection knob
On / Off button
Auxiliary function buttons
6