Bunn Electric Brewing System LCR-2 - Manual (Page 16)

16
ENTER PASSWORD
(-) 0 (+)
The following functions can be Password Protected. If you wish to prevent others from accessing these
functions, enter a 4 digit code of your choice. Record your password code [_ _ _ _], as you will need it
to access these functions in the future.
Use the (+) or (-) buttons to
enter password.
Enter the access Code to view the remaining
functions. Factory Default = 0.
MENU SCREEN ACTION DESCRIPTION
TANK TEMP 180
(-) EXIT (+)
READY TEMP 175
(-) EXIT (+)
CABINET TEMP 38
(-) EXIT (+)
LF PRODUCT DISP
.0GAL RESET?
LF PRODUCT DISP
.0GAL
RT PRODUCT DISP
.0GAL RESET?
RT PRODUCT DISP
.0GAL
Use the (+) or (-) buttons to
adjust the target Temp.
Use the (+) or (-) buttons to
adjust the target Temp.
Use the (+) or (-) buttons to
adjust the target Temp.
Select (RESET) to clear total
NONE
Select (RESET) to clear total
NONE
Sets the water Tank temperature [120 - 200°F]
or [49 - 93°C]
Sets the hot water Ready temperature. Typically
set to the minimum desired dispense temp.
Sets the Chilled Cabinet target temperature [38
- 50°F] or [3 - 10°C]
Selecting Reset will clear the Current accumulated
volume of concentrate dispensed through the Left
dispenser. Gal (Liters)
Displays the Total accumulated volume of
concentrate dispensed through the Left dispenser.
Not Re-settable. Gal (Liters)
Selecting Reset will clear the Current accumulated
volume of concentrate dispensed through the
Right dispenser. Gal (Liters)
Displays the Total accumulated volume of
concentrate dispensed through the Right
dispenser. Not Re-Settable. Gal (Liters)
SET PASSWORD ?
(-) 0 (+)
SELECT UNITS
ENG EXIT METRIC
CHILLED UNIT ?
NO EXIT YES
RINSE ALARM ?
NO EXIT YES
If NO - go to BIB EMPTY LOCKOUT menu.
Use the (+) or (-) buttons to
change the password.
Select the preferred units
Select (YES) or (NO)
Select (YES) or (NO)
Enter your own Code to prevent access to the
remaining functions. [0 to 9999]
Used to select the preferred units of measurement.
(Oz., Gal, deg F) or (mL, L, deg C)
LCR Models default to (YES)
Select (NO) to turn the refrigeration system
OFF.
Selecting Yes will enable the Rinse Alarm function,
(see Rinse Alarm)
36026 120105