MOTA Heating Pad - Manual (Page 3)

CAUTION
MyWarmPet® Heat Pad will be hot at surface temperature of
approximately 65 C / 149 F when heated according to the table above.
If cover is removed, please use a cloth or over glove to handle it. If you
prefer to use your MyWarmPet® Heat Pad without its cover, please
place it under your pet’s bedding and ensure pet cannot have contact
with its surface to prevent burns.
HEAT CYCLE
In the first 3 hours of use, your MyWarmPet® Heat Pad will
gradually reduce its heat to reach approximately 50 C / 122 F. It
will then remain at this temperature for about 5 hours before it
begins to cool down. Heat cycle will vary depending on the
environment it is being used in. Please do not re-heat the
MyWarmPet® Heat Pad until it has fully cooled down.
CLEANING
Use a damp cloth or spray your MyWarmPet® Heat Pad lightly
with disinfectants and wipe it dry. Abrasive substances or
scourers should not be used.
FOR VETERINARIANS
MyWarmPet® Heat Pad should never come into direct contact
with an animal. At all times, heat pad should be covered with a
cover, cloth, or suitable bedding to protect the animal from burn.
The use of this product is not recommended with animals that
are anesthetized or unconscious as they cannot react to thermal
discomfort.
Recovering animals which use this product should be monitored
for their ability to move away from the unit should any
discomfort arise. Never reheat MyWarmPet® until it has fully
cooled down.