MK Diamond MK-MANTA II - Manual (Page 4)

3
Notice: Your MK-Manta I Core Drill or other property could be damaged if you
don’t follow instructions.
Safety labels contain important safety information. Please read them carefully.
These labels are considered a permanent part of your drill. If a label comes off
or becomes hard to read, contact MK Diamond or your dealer for replacement.
Safety Messages
Hazard Symbols
Damage
Prevention
Messages
Safety Labels
( (
)
)
on
DANGER
You WILL be KILLED or SERIOUSLY INJURED if you do not follow directions.
WARNING
You CAN be KILLED or SERIOUSLY INJURED if you do not follow directions.
CAUTION
You CAN be INJURED if you do not follow directions.
A safety message alerts you to potential hazards that could hurt you or others.
Each safety message is preceded by a safety alert symbol ( ) and
one of three words:
DANGER, WARNING, or CAUTION.
Additional information as to the nature of the hazard is provided by the following
hazard symbols, which appear throughout the manual in conjunction with safety
messages.
Never touch electrical wires or components while the drill is running. They can be
sources of electrical shock which could cause severe injury or burns.
Before performing any maintence or service on this equipment, always turn
the switch off and unplug the drill from the power source to prevent accidental
starting.
Keep hands, feet, hair, and clothing away from all moving parts to prevent injury.
Other important messages that are designed to help prevent damage to your MK
Diamond Manta Core Drill, other property, or the environment, are preceded by
the word notice.
ELECTRICAL SHOCK!
ACCIDENTAL STARTS!
ROTATING PARTS!