MK Diamond Sawtec SDG-103 - Manual (Page 12)

12
PRODUCT SPECIFICATIONS
The SDG is a versatile unit. Operated and used according to this manual, the SDG will
provide years of dependable service.
FEATURES
SPECIFICATIONS
• Uses either a 10 or 20 segment 10" diameter diamond grinding discs to level, smooth or
clean the top surface of concrete slabs.
• Provides a smoother finish compared to other methods such as scarifiers.
• Dust shroud helps contain grinding debris.
• Works on concrete slabs, terrazzo, brick, stone and ceramic tile floors.
• The unique shroud system automatically adjusting to suit segment height and floor angle.
Specifications for the SDG are listed in the table below.
Model ST-SDG-101 ST-SDG 103
Power 110V/230V 1-Phase 230V 3-Phase
Amps 12.8/6.4 8.06
Horsepower 1 Hp 3 HP
Disc RPM 1725 1740
Disc Capacity 10" (254mm) 10" (254mm)
Ballast 70 lbs. (32kg) 70 lbs. (32kg)
Weight 120 lbs. (54kg) 147 lbs. (67kg)
LxWxH (inches) 43” x 14” x 41” 43” x 14” x 41”
LxWxH (mm) 1092 x 356 x 1041 1092 x 356 x 1041
Part # 169156 169157
SDG PRODUCT SPECIFICATIONS