MBT Lighting CX803A - Manual (Page 5)

ISO 9001 CERTIFIED
Chapter 2. CX-803A operation
2-1 SCENE setting
Select【CH】mode, and move the fader to set the dimming value
press【PROG】+【1~8】 to save control scene.
STEP-1 press【SC / CH】to select the control channel
LED : off in CH mode
LED : on in SC mode
STEP-2 move【MASTER-VR】to the top
STEP-3 move【VR-1 … VR-8】to dimming
STEP-4 press【PROG】+【1…8】to confirm and save the selection
1.) When MASTER-VR in 100%, and the VR-1…VR-8 in 50% of dimming value,
the SCENE total output dimming value will be 50%.
2.) When MASTER-VR in 50 %, and the VR-1…VR-8 in 50% of dimming value,
the SCENE total output dimming value will be 25%.
2-2 Scene recall
Refer to 2-1 to set up the dimming value of SC-1…SC-8, use the following
function to recall the scene.
A: 0%…100% VR control
STEP-1 press【SC / CH】key to select【SC】mode. (LED ”on”)
STEP-2 press【VR-1…VR-8】
Ex : to recall SC-2, adjust the【VR-2】, to recall scene 2 by dimming
B: FLASH
STEP-1 press【SC / CH】to select【SC】mode. (LED ”on”)
STEP-2 press【1…8】
EX : to recall SCENE 2, press【2】,and scene 2 switch to 100% full, and release the
key to off the function.
Lite-Puter
CX-803A [EUM-B]
4