MBT Lighting F416 - Manual (Page 2)

To keep clean of the lamp surface is very important since it allows the light output to
transmit. This should be cleaned with a soft damp cloth. The body of the unit may also
be cleaned in the same way. We recommend internal cleaning be carried out by a fully
qualified technician.
REMARK:
1. If the unit is not functional, please check if the main power supply is ‘on’.
2. If the unit is functional but one channel does not light, the channel fuse may require
replacing. Two extra fuses are provided for this purpose. Take care that the unit is
unplugged from AC power while changing fuses.
3. If the unit is functional but no channels light, check if the footswitch is in
BLACKOUT mode
4. If all channels light at the same time and will not chase, check is the footswtich is
in FULL ON mode
5. If the unit is functional but lamp does not light, the lamp may require replacing.
After trying the above solution you still have a problem, please contact your dealer or
our company for service.
WARNING：
Do not obstruct the air vents.
Do not touch unit or lamps while hot.
Never put any objects through the air grill on the top of the unit.
POWER CONNECTIONS
The unit is supplied with a power plug appropriate to its voltage and destination.
Should any other connections be required they must be carried out with the following
configuration.
The F416 controller is supplied with a grounded power plug and intended for use with
110-120 volt AC electrical connections. The unit is grounded for safety; do not attempt
to remove or disable the grounding feature on the plug. There are no user serviceable
parts insde the unit. Please take to a qualified service center for repair.
Earth = Green/Yellow cable
Neutral = Blue cable
Live = Brown cable