beautypg.com

Mayline Electrical Conference Table User Manual

Page 2

background image

(2)

Starter cable
(purchased
separately)

(As required)

1. Snap Outlets (2) into Power Blocks (1).

2. Slide Mounting Bracket (3) into position on Power

Blocks (1).

3. Lay 26" Connection Cable (4) into position within
the trough assembly. Position plugs on either side
of Connector Panels.

Place Starter Cable (purchased separately) into
trough assembly.
Place 68" Connector Cable (5) into trough

assembly as required.

4. Position Power Block assembly so that the

Mounting Bracket holes are toward mounting

flanges on the connector panels.
Plug Starter Cable, 26" Interconnecting Cable (4),
and 63" Interconnecting Cable (5) into assembled

Power Blocks (1).

Connector Panels

Starter cable

Connector Panels

Power Block
mounting bracket
holes

(As required)