Boss Audio Systems RC-20XL - Manual (Page 11)

11
Making connections
Important
Before you turn off the power, make sure that the following conditions are met.
All saved data may be lost if the power is turned off inappropriately.
• You must not be playing/recording/overdubbing a phrase
(The REC, PLAY, and OVERDUB indicators must not be lit)
• The WRITE indicator or EXIT indicator must not be lit
• The LOOP PHRASE or ONE SHOT PHRASE indicator is not flashing rapidly
If you are using batteries, the power will be turned off automatically when the
connector plug to your amp or speaker is unplugged from the OUTPUT jack.
Before unplugging this connector, make sure you check for the above states.
To avoid problems, select an empty phrase track whenever possible, and turn off/
on the power.
RC-20XL_e.book 11 ページ ２００４年４月２８日 水曜日 午後４時１２分