beautypg.com

Item number: ulexbur / ulexblk – Mayline 100 Series High-Back Chair User Manual

Page 2

background image

Item number: ULEXBUR / ULEXBLK

rev02

E X E C U T I V E H I - B A C K C H A I R

Part # Description

Quantity Part #

1.

2.

3.

4.

5.

6A.

6B.

7.

8.

9.

10.

11.

12.

13.

14.

15.

H

Casters

5 Star Base

Telescoping Cover

Gas Lift

Seat Plate

Left Arm

Right Arm

Seat Cushion

Back Cushion

Back Support Plate(already

attached to the back cushion)

1-1/4" Big Screws

1" Big Screws

1-1/2" Small Screws

1-1/2" Big Screws

Black Plastic Caps

Allen Keys

Hardware Pack

5

1

1

1

1

1

1

1

1

1

6

2

6

2

2

2

11625

11624

11626

11708

11601

11714

11714

11715

11712

~

H

H

H

H

H

H

11713




A. Remove all parts from carton and separate them into part number groups as indicated in parts list.
B. To begin assembly, place 5 Star Base (2) upside down and insert Casters (1) into bottom of Base (2).
C. Turn Base (2) right side up on the floor and insert Gas Lift (4) into center hole on Base (2).
D. Place Telescoping Cover (3) over the Gas Lift (4) and rest it on the Base (2).

E. Attach Seat Plate (5) onto the bottom of Seat Cushion (7) (with the FRONT of seat plate facing the FRONT of seat

cushion) by using 1-1/4" Big Screws (10) for the front holes of Seat Plate (5) and 1" Big Screws (11) for the rear
holes of the Seat Plate (5) and tighten screws.

F. Attach the Back Support Plate (9) of the Back Cushion (8) to the Seat Cushion (7) by using 1-1/4" Big Screws (10).

Do not tighten screws completely.

G. Attach the Arms (6A & 6B) onto the bottom of the Seat Cushion (7) by using 1-1/2" Small Screws (12) and

backsides of Back Cushion (8) by using 1-1/2" Big Screws (13). Tighten all the screws completely. Remember
to tighten screws on back support plate!

H. Place Black Plastic Caps (14) into arm holes once screws have been tightened.

I. Place the assembled chair on top of the Gas Lift (4) and press down until fully engaged.

J. Periodically (every 90 days) make sure that the screws are still fully tightened.


ATTENTION: Make certain all screws are fully tightened before using chair.

A S S E M B L Y I N S T R U C T I O N S

P A R T S L I S T