Mayline 100Series High-Back Chair - Manual (Page 2)

Item number: ULEXBUR / ULEXBLK
E X E C U T I V E H I - B A C K C H A I R
Item # Description Quantity Part #
1.
2.
3.
4.
5.
6A
6B.
7.
8.
9.
10.
11.
12.
13.
14.
H
Casters
5 Star Base
Telescoping Cover
Gas Lift
Seat Plate
Left Arm Support
Right Arm Support
Seat Cushion
Back Cushion
1-1/4” Black Screws
1-1/4” Colored Screws
3/4” Colored Screws
Left Arm Pad
Right Arm Pad
Wrench
Hardware Pack
5
1
1
1
1
1
1
1
1
4
8
6
1
1
1
1
11625
11624
11626
11708
11601
11660**
11660**
11638**
11637**
H
H
H
11622(blk)
11627(bur)
H
11602
A. Remove all parts from carton and separate them into part number groups as indicated in parts list.
B. To begin assembly, place 5 star base (2) upside down and insert casters (1) into bottom of base (2).
C. Turn base (2) right side up on the floor and insert gas lift (4) into center hole on base (2).
D. Place telescoping cover (3) over the gas lift (4) and rest it on the base (2).
E. Secure arm pads (12 & 13) to the arms (6A & 6B) by using 3/4” colored screws (11).
F. Use 1-1/4" colored screws (10) to fasten arms (6A & 6B) to the back of the back cushion (8). Do not tighten
screws completely.
G. Insert 1-1/4" colored screws (10) into arm holes attaching arms (6A & 6B) to the bottom of seat cushion (7).
Tighten all the screws for arms.
H. Attach seat plate (5) to the bottom of seat cushion (7) (with front of seat plate facing front of seat cushion) by using
1-1/4" black screws (9) and tighten screws.
I. Place the assembled chair on top of gas lift (4) and press down until fully engaged.
J. Periodically (every 90 days) make sure that the screws are still fully tightened.
ATTENTION: Make certain all screws are fully tightened before using chair.
A S S E M B L Y I N S T R U C T I O N S
P A R T S L I S T