Mayline Stationary Shelf - Manual (Page 2)

4. Attach Shelf Brackets (1) with
Fasteners (E2) to Rack Mount
Rails in Cabinet.
1. Attach Rails approximately 4 1/2 " inboard from outer cabinet frame.
2. Select the desired height where the shelf will be mounted in the cabinet.
3. Install Cage Nuts (E4) into selected holes, two per support.
TO INSTALL CAGE NUTS (E4):
A.) Place bottom of Cage Nut through square hole from back side of rail (see detail at right),
allowing the lower portion of Cage Nut to grip the rail.
B.) Compress the upper portion of the Cage Nut with your thumb and snap Cage Nut into
place.
TO REMOVE CAGE NUTS (E4):
Compress Cage Nut with pliers.
NOTE:
(2)