Mayline Standard Data Cabinets - Manual (Page 2)

NOTE:
2. Attach Handle (E1) to front door with fasteners (E2).
3. Insert Cage Nuts (E4) as required to attach panels and / or
accessories with screws (E5).
TO INSTALL CAGE NUTS:
A.) Place bottom of Cage Nut through square hole from back side of rail
(see detail at right), allowing the lower portion of Cage Nut to grip the rail.
B.) Compress the upper portion of the Cage Nut with your thumb and
snap Cage Nut into place.
TO REMOVE CAGE NUTS:
Compress Cage Nut with pliers.
1. Install Glides (E3) into nearest to base corners. (When installing
optional Casters use holes farthest form the corner).
NOTE:
Removal of the Cabinet Top
Knockouts requires a sharp
blow with a hammer.
INNER HOLE for
OPTIONAL caster