beautypg.com

Mayline SR6033R User Manual

Page 4

background image

8. To install dividers, insert a divider through each slot. Dividers slide down through slots in all
shelves until they rest on the bottom shelf. Note: the end of each divider with the two holes should
be facing up.

9. When all the dividers are in place, pull each one forward to lock into position. Insert the plastic
buttons into the holes behind the dividers on the top and bottom shelves with divider slots.

10. Position the top shelf (1" front flange and no divider slots) over the top row of tabs on the back

panel and with its tabs through the loops on the inside end panel, and set it carefully in place.

11. Remove backing from double-faced tape previously attached to bottom of sorter and set in

place. Tape will prevent sorter from moving on table.