Bizfon Conference Series - Manual (Page 7)

Bizfon Conference Series Phone User’s Guide 3
Section 2
Getting Started
Installing the
Bizfon Confer-
ence Series
Phone To install your conference phone, follow
these steps:
1. Find a suitable location for the confer-
ence phone such as in the middle of a
conference room table. The ideal room
size is no larger than 10 by 20 feet.
2. Insert one end of the LONG telephone
cord into the PHONE jack on the power
adapter.
3. Insert the other end of the LONG tele-
phone cord into the PHONE jack on the
conference phone and be sure to run the
cord under the cord clip.
4. Insert one end of the SHORT telephone
cord into the LINE jack of the power
adapter.
5. Insert the other end of the SHORT cord
into any available extension port on your
Bizfon 680.
If you are not using a Bizfon 680, con-
nect the line cord to standard telephone
wall jack
6. Plug in the power adapter to a standard
AC outlet.
NOTE: If the conference phone does not work after
you plug it in, verify that you have connected
the LONG and SHORT cords correctly.